|
signal monitors, vehicle
detectors, power supplies, load switches,
flashers, bus interface units, and detector
harnesses that offer value added benefits for
traffic signal cabinets as well as gate,
parking, and/or door operators
Traffic Signal Monitors Advanced
power electronics enabling delivery of
electricity anytime anywhere!
Pedestrian School Zone, 24Hr Flashing Beacons ,
Aviation Lights, Bus Stop & Shelter Lighting,
Industrial Worksite Lights, Marine Lights,
Obstruction Lights, Pedestrian, School Zone &
24Hr Flashing Beacons, Railway Lights
|
EDI provides traffic
control and access professionals with
reliable hi-tech component products
(signal monitors, vehicle detectors,
power supplies, load switches, flashers,
bus interface units, and detector
harnesses) that offer value added
benefits for traffic signal cabinets as
well as gate, parking, and/or door
operators. These benefits include
built-in set-up and diagnostic tools
which literally save technicians time
and money to accurately install and
trouble-shoot these mission critical
systems, thus banking budgeted dollars
and maximizing profits.
|
LMD DEFLECTOMETER
Series Vehicle Detectors for Traffic
To help users
install and maintain traffic control
loop systems quickly and reliably, EDI
introduces the LMD DEFLECTOMETER series
vehicle detectorsDC Isolator
The Model 242 meets and exceeds all
Caltrans requirements. The Model 242E
adds enhanced trouble shooting and
signal filtering features
Advanced LCD Vehicle Detectors
The ORACLE E series provide numerous
tools, meters, data, and diagnostics to
bring you the most ENHANCED full
featured vehicle detectors on the market
today.
DEFLECTOMETER™ Vehicle Detectors
for Access Control
To help users install and maintain
access control operator systems quickly
and reliably, EDI introduces the
LMA-1400 DEFLECTOMETER™ series vehicle
detectors.
MMU-16LE SmartMonitor™
Introducing the MMU-16LE, a menu driven
LCD based TS-2 MMU. Whether you’re a
NOVICE or EXPERT Signal Technician.
Vehicle Detectors for Access
Control.
To allow your gate, parking, and
roll-up door operator systems to operate
reliably and trouble free, EDI has
released the simple to use LMA-100 and
LMA-200 series vehicle detectors
Cabinet Power Supply
Introducing the PS-250, a heavy duty
power supply for cabinets where high
current video detection devices are
used. The PS-250 provides 5 Amps at 12
Vdc over the full Nema temperature
range.
|
Traffic > Signal
Monitors
NEMA TS-2 Signal Monitors
MMU-16LE SmartMonitor™ LCD Series
The MMU-16LE series Malfunction
Management Unit (MMU) exceeds all the
requirements set forth in the NEMA
Standard TS2-2003, Part 4. The model
MMU-16LE includes two large area Liquid
Crystal Displays (LCD) for a continuous
Full Intersection display. A separate
graphical LCD provides a menu driven
interface to status, signal voltages,
configuration, event logs, and the
integrated context sensitive Help
System. The built-in Setup Wizard
ensures that the enhanced monitor
programming is done quickly and
accurately, even by a novice. The
industry first Diagnostic Wizard
automatically pinpoints malfunctioning
signals and offers trouble shooting
advice. An EIA232 port is used to
communicate with a Personal Computer
using field proven EDI ECcom™ software.
Monitor status, event logs, and Signal
Sequence History logs are stored in
nonvolatile memory for diagnostic and
archival purposes.
MMU-16LE 12/16 channel MMU-16E Series
The MMU-16E series Malfunction
Management Units (MMU) exceed all the
requirements set forth in the NEMA
Standard TS2-2003 , Part 4 (TS2-1992 has
been revised!). These units are intended
to provide basic conflict and voltage
monitoring for NEMA TS-2 traffic
controller assemblies while maintaining
downward compatibility with NEMA TS-1
assemblies. The model MMU-16E includes a
RYG Full Intersection display along with
an RS232 port which is used to
communicate with a Personal Computer
using EDI ECcom™ software. Monitor
status, event logs, and Signal Sequence
History logs are stored in nonvolatile
memory for diagnostic and archival
purposes. MMU-16E 12/16 channel
NEMA TS-1 Signal Monitors
SSM-LE Series
The SSM-LE series Signal Monitors exceed
all the requirements set forth in the
NEMA Standard TS-1-1994, Part 6. These
units are intended to provide enhanced
conflict and voltage monitoring for
traffic controller assemblies with
additional capabilities for broader
fault coverage and diagnostic
troubleshooting. The SSM-6LE and
SSM-12LE units include a Full
Intersection Liquid Crystal display
(LCD) along with an RS232 port which is
used to communicate with a Personal
Computer using EDI ECcom™ software.
Monitor status, event logs, and Signal
Sequence History logs are stored in
nonvolatile memory for diagnostic and
archival purposes. SSM-6LE 6 channel
SSM-12LE 12 channel
SSM-18LEPR 18 channel (not ECcom™
compatible)
SSM-E Series
The SSM-E series Signal Monitors exceed
all the requirements set forth in the
NEMA Standard TS-1-1994, Part 6. These
units are intended to provide enhanced
conflict and voltage monitoring for
traffic controller assemblies with
additional capabilities for broader
fault coverage.
SSM-3E 3 channel
SSM-6E 6 channel
SSM-12E 12 channel
NSM Series
The NSM series Signal Monitors exceed
all the requirements set forth in the
NEMA Standard TS-1-1994, Part 6. These
units are intended to provide basic
conflict and voltage monitoring for
traffic controller assemblies.
NSM-3 3 channel
NSM-6 6 channel
NSM-12 12 channel
Type 170/179/2070 Signal Monitors
2010 Series Signal Monitors
2010ECL Series
The model 2010ECL is a 210ECL monitor
configured for operation with a 2070
Controller Unit. It provides all the
features of the 210ECL model as well as
minimum flash capabilities for 2070 boot
capability. The 2010ECL series monitor
is compatible with 170, 179 and 2070
Controller Units. It is a recommended
replacement for the 210E and 210ECL
monitor in new installations using 170
or 2070 Controller Units.
2010 Series
The model 2010 is a 210E monitor
configured for operation with a 2070
Controller Unit. It provides all the
features of the 210E model as well as
minimum flash capabilities for 2070 boot
capability. The 2010 series monitor is
compatible with 170, 179 and 2070
Controller Units. It is a recommended
replacement for the 210E monitor in new
installations using 170 or 2070
Controller Units.
210 Series Signal Monitors
210ECL Series
The model 210ECL includes the functions
of the 210E unit and adds a RYG Full
Intersection display along with an RS232
port which is used to communicate with
the Controller Unit operational software
or a Personal Computer using EDI ECcom™
software. Monitor status, event logs,
and Signal Sequence History logs are
stored in nonvolatile memory for
diagnostic and archival purposes.
210ECL
210E Series
The model 210E meets all the
requirements set forth in the Caltrans
Traffic Signal Control Specifications
and provides the enhanced functions of
Red signal monitoring, Dual Indication
monitoring and Clearance monitoring.
210E
210N Series
The model 210N meets all the
requirements set forth in the Caltrans
Traffic Signal Control Specifications
with the addition of Red signal
monitoring.
210N
210C Series
The model 210C meets all the
requirements set forth in the Caltrans
Traffic Signal Control Specifications.
These units are intended to provide
basic conflict and voltage monitoring
for Type 170/179 traffic controller
assemblies. 210C Caltrans QPL listed
210-NY NYSDOT QPL listed
ITS Cabinet Signal Monitors
CMU-212 Series
The EDI CMU-212 Cabinet Monitor Unit is
intended to operate with the AMU-214
Auxiliary Monitor Unit to form a compact
and modular cabinet malfunction
management system for the ITS Cabinet.
The CMU-212 functions as the main
cabinet fault monitoring component. It
offers the broadest fault coverage of
any monitoring system and incorporates
full event logging and status reporting,
providing the signal technician with
powerful monitoring and trouble-shooting
tools to ensure that cabinet
malfunctions are detected, diagnosed,
and repaired with confidence.
The CMU-212 meets all requirements of
the ASHTO/ITE/NEMA Intelligent
Transportation System (ITS) Standard
Specification for Roadside Cabinets
Version 01.02.15, as well as the
Caltrans TEES, August 2002 requirements.
CMU-212 32 channel Monitor Unit
AMU-214 Series
The EDI AMU-214 Auxiliary Monitor
Unit is intended to operate with the
CMU-212 Cabinet Monitor Unit to form a
compact and modular cabinet malfunction
management system for the ITS Cabinet.
The AMU-214 provides the voltage and
current data acquisition function of the
cabinet monitoring system. Up to four
AMU-214 units can be installed in ten
different cabinet configurations with
each CMU-212.
The AMU-214 meets all requirements of
the ASHTO/ITE/NEMA Intelligent
Transportation System (ITS) Standard
Specification for Roadside Cabinets
Version 01.02.15, as well as the
Caltrans TEES, August 2002 requirements.
AMU-214 Dual mode 6 channel and 14
channel
MonitorKey™ Programming Tool
The EDI MonitorKey™ CMU Data Key
Programming Tool provides the
programming interface between a Personal
Computer and the Data Key used to store
configuration parameters in the CMU-212.
The compact tool connects to a serial
port of the PC and uses the MonitorKey™
Windows based software to read, write,
and verify the contents of the Data Key.
Software Wizards are provided to
simplify the initial setup of the
parameter database and check for
consistency errors. MonitorKey™
Programming Tool and included software
|
Products > Traffic >
Inductive Loop Detectors
NEMA TS 2 TYPE - Vehicle /
Intersection Detectors - Rack Mount
LM 622 Series: Two channel rack mount
NEMA TS2 detector with 15 levels of
sensitivity, four loop frequencies,
three modes of operation. Timing is an
option.
LM 624 Series: Four channel rack mount
NEMA TS-2 detector with 15 levels of
sensitivity, four loop frequencies,
three modes of operation. Timing is
optional.
LM 642t Series: Two channel rack mount
NEMA TS2 detector with 15 levels of
sensitivity, four loop frequencies,
three modes of operation, timing, and
System / Count outputs.
NEMA TS 1 Type - Vehicle /
Intersection Detectors - Rack Mount
Oracle 2E Series: Two channel
rack mount detector with LCD Display, 20
levels of sensitivity, eight loop
frequencies, three modes of operation.
Oracle 4E Series: Four channel
rack mount detector with LCD Display, 20
levels of sensitivity, eight loop
frequencies, three modes of operation.
LM 602 Series: Two channel rack
mount detector with 15 levels of
sensitivity, four loop frequencies,
three modes of operation. Timing and
relay outputs are options.
LM 612 Series: Two channel rack
mount thumbwheel detector with 15 levels
of sensitivity, three loop frequencies,
three modes of operation. Timing and
relay outputs are options.
LM 604 Series: Four channel rack
mount detector with 15 levels of
sensitivity, four loop frequencies,
three modes of operation. Timing is
optional.
LM 602-ST: The LM 602-ST "Speed
Trap" or "Traffic Calming" detector is
designed to use two loops to measure
vehicle speed. If the measured speed
exceeds a switch selectable threshold, a
pulse output is generated on the Channel
1 output. Applications include traffic
calming and advanced warning
indications. This two channel rack mount
detector has 15 levels of sensitivity
and four loop frequencies.
LM 632t Series: Two channel rack
mount detector with 15 levels of
sensitivity, four loop frequencies,
three modes of operation, timing and
System / Count outputs. Relay outputs
are an option.
NEMA TS 1 Type - Vehicle /
Intersection Detectors - Shelf Mount
Oracle /S1 Series: Single channel
shelf mount detector with LCD Display,
15 levels of sensitivity, eight loop
frequencies, three modes of operation.
Oracle /S2 Series: Dual channel
shelf mount detector with LCD Display,
15 levels of sensitivity, eight loop
frequencies, three modes of operation.
LM 301 Series: Single channel
shelf mount detectors with 16 levels of
sensitivity, four loop frequencies, and
three modes of operation. Timing and
solid state outputs are options.
LM 331 Series: Single channel
shelf mount detectors with 16 levels of
sensitivity, four loop frequencies,
three modes of operation, timing and
separate System / Count output. Solid
state outputs are options.
LM 302 Series: Two channel shelf
mount detectors with 15 levels of
sensitivity, four loop frequencies, and
three modes of operation. Timing and
solid state outputs are options.
LM 332 Series: Two channel shelf
mount detectors with 15 levels of
sensitivity, four loop frequencies,
three modes of operation, timing and
separate System / Count outputs. Solid
state outputs are optional.
LM 304 Series: Four channel shelf
mount detectors with 15 levels of
sensitivity, four loop frequencies, and
three modes of operation. Solid state
outputs are optional.
Mating Harness for single and dual
channel shelf mount vehicle detectors is
LMH8
CALTRANS 170/2070 TYPE - Vehicle /
Intersection Detectors - Rack Mount
LM 222 Series: Two channel rack mount
detector with 8 levels of sensitivity,
four loop frequencies, three modes of
operations. Caltrans QPL.
SYSTEM / COUNT TYPE - Vehicle /
Intersection Detectors - Shelf Mount –
NEMA TS 1
Oracle /S1 Series: Single channel
shelf mount detector with LCD Display,
15 levels of sensitivity, eight loop
frequencies, three modes of operation.
Oracle /S2 Series: Dual channel
shelf mount detector with LCD Display,
15 levels of sensitivity, eight loop
frequencies, three modes of operation.
LM 331 Series: Single channel
shelf mount detectors with 16 levels of
sensitivity, four loop frequencies,
three modes of operation, timing and
separate System / Count output. Solid
state outputs are options.
LM 332 Series: Two channel shelf
mount detectors with 15 levels of
sensitivity, four loop frequencies,
three modes of operation, Timing and
separate System / Count outputs. Solid
state outputs are optional.
Mating Harness for single and dual
channel shelf mount vehicle detectors is
LMH8.
SYSTEM / COUNT TYPE - Vehicle /
Intersection Detectors - Rack Mount –
NEMA TS 1
Oracle 2EC Series: Two channel
rack mount detector with LCD Display, 20
levels of sensitivity, eight loop
frequencies, three modes of operation.
Oracle 4EC Series: Four channel
rack mount detector with LCD Display, 20
levels of sensitivity, eight loop
frequencies, three modes of operation.
LM 632t Series: Two channel rack
mount detector with 15 levels of
sensitivity, four loop frequencies,
three modes of operation, timing, and
System / Count outputs. Relay outputs
are an option.
SYSTEM / COUNT TYPE - Vehicle /
Intersection Detectors - Rack Mount –
NEMA TS 2
Oracle 2EC Series: Two channel
rack mount detector with LCD Display, 20
levels of sensitivity, eight loop
frequencies, three modes of operation.
Oracle 4EC Series: Four channel
rack mount detector with LCD Display, 20
levels of sensitivity, eight loop
frequencies, three modes of operation.
LM 642t Series: Two channel rack
mount NEMA TS2 detector with 15 levels
of sensitivity, four loop frequencies,
three modes of operation, timing, and
System / Count outputs.
SYSTEM / COUNT TYPE - Vehicle /
Intersection Detectors - Rack Mount –
CALTRANS 170/2070 Type
Oracle 2EC Series: Two channel
rack mount detector with LCD Display, 20
levels of sensitivity, eight loop
frequencies, three modes of operation
|
Products > Traffic > Load Switches &
Flashers
The solid aluminum extruded heat sink
design of the EDI Load Switch and
Flasher ensures lower operating
temperatures for reliable long term
operation.
AC Line Solid State Load Switches
Model 510: The model 510 solid
state Load Switch meets all requirements
of NEMA TS-1 and NEMA TS-2 Standards.
Maximum load current is 10 Amps RMS over
full operation temperature.
Model 510-225: The model 510-225
solid state Load Switch meets all
requirements of NEMA TS-1 and NEMA TS-2
Standards. Maximum load current is 10
Amps RMS over full operation
temperature. This unit operates at 220
Volts and 50 Hertz.
EDI Model 510 Full Load Test Report
Model 200: The model 200 solid
state Switch Pack is compatible with
Type 170 cabinets. Maximum load current
is 10 Amps RMS over full operation
temperature.
Model 200-225: The model 200-225
solid state Switch Pack is compatible
with Type 170 cabinets. Maximum load
current is 10 Amps RMS over full
operation temperature. This unit
operates at 220 Volts and 50 Hertz.
AC Line Solid State Flashers
Model 810: The model 810 solid
state Flasher meets all requirements of
NEMA TS-1 and NEMA TS-2 Standards.
Maximum load current is 15 Amps RMS per
circuit over full operation temperature.
Model 810-225: The model 810-225
solid state Flasher meets all
requirements of NEMA TS-1 and NEMA TS-2
Standards. Maximum load current is 15
Amps RMS per circuit over full operation
temperature. This unit operates at 220
Volts and 50 Hertz.
Model 204: The model 204 solid
state Flasher is compatible with Type
170 cabinets. Maximum load current is 15
Amps RMS per circuit over full operation
temperature.
Model 204-225: The model 204-225
solid state Flasher is compatible with
Type 170 cabinets. Maximum load current
is 15 Amps RMS per circuit over full
operation temperature. This unit
operates at 220 Volts and 50 Hertz.
DC Solid State Load Switches
Model 548: The model 548 solid
state load switch is intended for DC
powered applications. Maximum load
current is 10 Amps at 48 Vdc. Each
output is over-current and short circuit
protected for maximum reliability. This
unit is physically compatible with the
standard NEMA or Type 170 load switch.
DC Solid State Flashers
Model 848: The model 848 solid
state Flasher is intended for DC powered
applications. Maximum load current is 15
Amps at 48 Vdc per circuit. Each output
is over-current and short circuit
protected for maximum reliability. This
unit is physically compatible with the
standard NEMA or Type 170 flasher
|
Products > Traffic > Auxiliary
Devices
NEMA TS-2 Bus Interface Unit (BIU)
Model 700: The model BIU-700 Bus
Interface Unit (BIU) performs the
interface between Port 1 of the
Controller Unit and the Loop Detector
Racks, Terminals and Facilities, and
other devices in a NEMA TS-2 Cabinet
Assembly. Its functions include
controlling load switch outputs,
detector resets, communicating with
Inductive Loop Detectors and other
devices, and the conditioning and
conversion of Terminals and Facilities
and Loop Detector call inputs for the
Controller Unit.
Model 720: The model BIU-720 Bus
Interface Unit (BIU) adds an additional
port for communicating with rack devices
meeting the NEMA TS2-2003 BIU2
requirements.
Model 730: The model BIU-730 Bus
Interface Unit (BIU) adds an additional
port for communicating with rack devices
meeting the NEMA TS2-2003 BIU2
requirements but electrically compliant
with EIA-232 electrical standards.
Model 740: The model BIU-740 Bus
Interface Unit (BIU) provides an EIA-232
port on the front panel for custom
applications.
NEMA TS-2 Cabinet Power Supply
NEMA TS-2 Cabinet Power Supplies
PS-200: The model PS-200 power
supply meets or exceeds all requirements
for NEMA TS2-2003. It provides +24 VDC
at 2 Amps, +12 VDC at 2 Amps, 12 VAC at
0.25 Amps, and a Line Frequency
reference output. LED indicators and
fuses are provided for all three output
voltages.
PS-250: The model PS-250 power
supply meets or exceeds all requirements
for NEMA TS2-2003. It provides +24 VDC
at 2 Amps, +12 VDC at 5 Amps, 12 VAC at
0.25 Amps, and a Line Frequency
reference output. LED indicators and
fuses are provided for all three output
voltages.
ITS Cabinet Serial Interface Unit
(SIU)
SIU-218: The model SIU-218 Serial
Interface Unit (SIU) performs the
interface between Serial Bus #1 of the
Advanced Controller Unit (ATC) and the
Input Assembly, Output Assembly, and
other devices in an ITS Cabinet. Its
functions include controlling load
switch outputs, detector resets,
communicating with inductive loop
detectors and other devices, and the
conditioning and conversion of loop
detector call inputs for the ATC. The
SIU-218 Serial Interface Unit meets all
requirements of the ASHTO/ITE/NEMA
Intelligent Transportation System (ITS)
Standard Specification for Roadside
Cabinets Version 01.02.15, as well as
the Caltrans TEES, August 2002
requirements.
|
Products > Traffic > Software
ECcom™
ECcom™ PC software runs on a Windows
based personal computer and gives a
signal technician the capability to
retrieve, display, store, and print
real-time status and historical data
from the EDI MMU-16LE, MMU-16E, SSM-LE,
2010ECL, 210ECL, and ITS CMU series
monitors.
MonitorKey™
Coming Soon.
|
|
Products > Traffic >
Power Supplies
Detector Power Supplies - Rack Mount
PS-150: The PS-150 four channel
power supply is built on international
format cards with gold edge connector
fingers. Each power supply channel will
nominally supply 24Vdc at 0.25 Amp when
connected to the 115 VAC line. Output
current is rated to 0.5 Amp per output
over temperature.
PS-100: The PS-100 four channel
power supply is built on international
format cards with gold edge connector
fingers. Each power supply channel will
supply 24Vdc at 0.25 Amp (1.0 Amp total)
when connected to the 115 VAC line.
PS-050: The PS-050 two channel
power supply is built on international
format cards with gold edge connector
fingers. Each power supply channel will
supply 24Vdc at 0.25 Amp (0.5 Amp total)
when connected to the 115 VAC line.
Cabinet Power Supplies - Shelf Mount
PS-200: The model PS-200 power
supply meets or exceeds all requirements
for NEMA TS2-2003. It provides +24 VDC
at 2 Amps, +12 VDC at 2 Amps, 12 VAC at
0.25 Amps, and a Line Frequency
reference output. LED indicators and
fuses are provided for all three output
voltages.
PS-250: The model PS-250 power
supply meets or exceeds all requirements
for NEMA TS2-2003. It provides +24 VDC
at 2 Amps, +12 VDC at 5 Amps, 12 VAC at
0.25 Amps, and a Line Frequency
reference output. LED indicators and
fuses are provided for all three output
voltages. |
Products > Access > Inductive Loop
Detectors
Parking and Access Control - Vehicle
Detectors - 11 pin Amphenol Connector -
Box Type
Note: The LMA-1100 and LMA-1200
DEFLECTOMETER™ Series detectors have
been upgraded to the LMA-1150 and
LMA-1250 series.
LMA 1150: Single channel with
programmable single relay output. The
DEFLECTOMETER™ display helps optimize
the proper sensitivity setting to detect
all vehicles including motorcycles. NO
MORE GUESS WORK WHEN SETTING
SENSITIVITY! The LMA-1150 Series offer
two models to handle any input power
requirement:
LMA-1150-LV (12Vdc, 24Vdc, & 24Vac)
LMA-1150-HV (120Vac to 240Vac)
Note: The LMA-1150 Series is offered in
either Fail Safe or Fail Secure
configurations.
LMA 1250: Single channel with
programmable dual relay output. The
DEFLECTOMETER™ display helps optimize
the proper sensitivity setting to detect
all vehicles including motorcycles. NO
MORE GUESS WORK WHEN SETTING
SENSITIVITY! The LMA-1250 Series offer
two models to handle any input power
requirement:
LMA-1250-LV (12Vdc, 24Vdc, & 24Vac)
LMA-1250-LP (12Vdc, 24Vdc) Low Power
LMA-1250-HV (120Vac to 240Vac)
Note: The LMA-1250 Series is offered in
either Fail Safe or Fail Secure
configurations.
LMA-100: Single channel with
single relay output. The LMA-100 Series
offer two models to handle any input
requirement:
LMA-100-LV (12VDC, 24VDC, & 24VAC)
LMA-100-HV (120VAC to 240VAC)
Note: The LMA-100 Series is offered in
either Fail Safe or Fail Secure
configurations.
LMA-200: Single channel with
programmable dual relay output. The
LMA-200 Series offer two models to
handle any input requirement:
LMA-200-LV (12VDC, 24VDC, & 24VAC)
LMA-200-HV (120VAC to 240VAC)
Note: The LMA-200 Series is offered Fail
Safe configuration only.
Mating Harness for models LMA-1150,
LMA-1250, LMA-100, and LMA-200 series is
model LMH4-11.
Parking and Access Control – Vehicle
Detectors - 10 pin Molex Connector - PCB
Type
LMA 1500: Single channel with
dual programmable solid state outputs.
Printed circuit board (pcb) mounted. The
DEFLECTOMETER™ display helps optimize
the proper sensitivity setting to detect
all vehicles including motorcycles. NO
MORE GUESS WORK WHEN SETTING SENSITIVITY
OR FREQUENCY!
• Plug-in compatible with Elite SL3000*
& CSW200* Omniboard models.
• Other industry operators may also be
compatible, please contact EDI for brand
and model number updates.
LMA 400: Single channel series
with dual programmable relay outputs.
Printed circuit board (PCB) mounted. Ten
levels of sensitivity and four loop
frequencies. Supply voltage is 12 Vdc or
24 Vdc. Available with 10 pin male or
female connector |
More information on PDF format
|
